General discussion

Locked

Memory

By leonlai99 ·
my pc is using celeron 400 and 64 SD-Ram(66MHZ).NOw I wanted add another SD-Ram
is running 128MB SD-RAM (133Mhz).
OK,question is,can the Ram support on my
mainboard? or got any suggestion how to config it?
Thanx

This conversation is currently closed to new comments.

7 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Memory

by Squeech In reply to Memory

Chances are you are unable to put anything but 66MHz DIMMs in your motherboard...depending on you chipset. If however your motherboard can handle faster RAM speeds, this is most often configurable in the BIOS, or jumper settings on your motherboard. Without the specific motherboard type, I can't say for sure which to use to configure it.

Collapse -

Memory

by leonlai99 In reply to Memory

The question was auto-closed by TechRepublic

Collapse -

Memory

by Walter_Loh In reply to Memory

Technical the 128 133Mhz ram will fall back to 128 66Mhz and work . But becareful of choice the RAM coz most of the 3rd party will not work .

Someting like Kibngston Will work no problem .

Collapse -

Memory

by leonlai99 In reply to Memory

The question was auto-closed by TechRepublic

Collapse -

Memory

by bigduck In reply to Memory

If you are running windows 98 or 95 don't waste your money on more RAM. These OSes will not support more than 64 MB. They will let you put more in and report it, but it will not be used. It is pure marketing hype that you will use more than 64 MBof ram. Win2k and WinXP will use as much as you can put in the machine, but 95 and 98 are lilmeted to 64MB.

Collapse -

Memory

by leonlai99 In reply to Memory

The question was auto-closed by TechRepublic

Collapse -

Memory

by leonlai99 In reply to Memory

This question was auto closed due to inactivity

Back to Hardware Forum
7 total posts (Page 1 of 1)  

Related Forums