Discussion Locked

memory isn't identified correctly

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Windows 2000 professional is not showing my correct memory when you go to properties in my computer

5 replies

by johan101

Hi
It would help to know how much ram is being reported and how much you really have.
But here is one posible explanation ...
If you have an onboard video card with shared memory the shared amount gets added to the main amount of memory . Ofcourse you can sometimes select the amount of shared video ram to use in the bios.
please also remember that one or two meg diference is not unusual .

If it aint one of these and the BIOS shows the correct amount you might limit windows to just use a certain amount of RAM .Each edition can do it but I can't remember exactly how.

Anyway , I wouldn't worry too much unless it causes some problems ...

Happy Troubleshooting

by yelhsa3840

if your talking about system ram and you added some to an older mainboard (2-3yrs old) the mainboard probly wont accept big sticks of ram my computers at work only support 128mb sticks of ram and my boss tried putting 256mb sticks in it

This discussion is closed to new replies.