Discussion Locked

Migrating from Novell to MS 2000 Server

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I am planning the migration of my Novell Network to a MS 2000 Server.
What would be the best practical steps to take to acieve tis project.
In another way: How would you do it?
Thanks

1 reply

by vinnyd

I have done that a number of times now from Novell 3.12 to a Windows 2000 server.

The steps I have taken are:

1. Review the applications that store data on the novell server. Are they older programs that do not like to run on NTFS partitions. Some older programs run very slowly on NTFS (this is how I determine if I need a FAT partition on the W2K server). Next do you need NTFS security for the older apps? You may have to put them on NTFS to get the security levels you need.

2. Setup the Wk2 Server as per your plan for partitions and applications. (you may want to plan for future server apps at this time such as exchange server, etc). I prefer to have an OS partition and a data partition - for future planning have done most serverswith 2 hard drives, one for the OS and one for applications and user data.

3. Setup the users over again in Wk2 server. This lets you get rid of any users you do not have anymore and lets you set the user groups and rights again. If possible, give the users the same login name and password they have on the novell server.

4. Load the Novell Gateway and you can move or copy the info from the novell server to the wk2 Server. And then test your apps and logins to make sure the security you have setup works.

5. Now you are ready to activate the new server. Leave the novell server running as backup. If something goes wrong you can just switch back.

6. When your sure everything is working as it should remove the novell server from the network and remove the novell clients from the workstations.

This discussion is closed to new replies.