11 replies
by timwalsh
The minimums that Microsoft quotes are just that - the absolute minimum that a given version of software will load and run on. Notice that Microsoft doesn't say anything about speed or efficiency when it quotes those minimums.
The minimums your group has come up with are reasonable, although I would consider increasing the memory when the budget allows (memory is cheap these days.
I have found that although 128MB works okay if you aren't a power user, if you run more than a couple of applications at the same time, Win2k will start paging out to disk.
by pete0723
by ann777
I still would consider 400 MHz a bit too slow for today's applications under Windows 2000. 128 MB is a good minimum. And as far as hdd space, the more the better; it's getting more and mor difficult to find hdds smaller than 20 GB.
If you're using Windows 2000 in a networked domain (you are not giving us any numbers to go by here -- how many computers in your domain?) for "reasonable performance" then I'd recommend at least:
1 GHz or better processor
128 MB or more RAM
20 GB or morestorage
If you could up memory to 256MB, then that'll improve performance greatly. But in today's terms a 400 MHz processor does not cut it.
by pete0723
by c.barnhorst
by pete0723
by opatzg9
by pete0723
by thechas
I have always used 2X Microsoft's minimums as the "practical" minimum for a functioning system.
Just a basic rule of thumb, but it has served me well.
When I upgraded my Pentium 233MMX to W98 from W95, I saw a 15% reduction in performance.
I won't install anything newer than W95 on anything less than a 300MHz system.
Many software boxes have listed minimum, and recommended hardware.
Take a look at your application software, and set your minimum hardware requirements to slightly over the recommended hardware level.
Chas
by pete0723
by pete0723
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending