Discussion Locked

Missing from User mode

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have some laptops set up with Windows 2000, and have been set up with a User mode (Restricted User) and I have noticed that in this mode you are unable to add a local printer, but you can add a network printer. The option of add local printer is grayed out.
Also in user mode the battery monitor is missing from the system tray.
I would say there is a group policy somewhere for these but I haven't been able to find any. Does anyone know where the policy is to set this up?

7 replies

by grenge

I have worked out the Battery problem. The Power management was missing but when the power lead was unplugged, the battery monitor appeared.
Still can't fix the printer issue.

by securitytech

You could add the users to the "load and unload device drivers" group located in Local Security Policy\Local Policy\User rights assignment. Assuming that this only needs to be done once, why not just do this logged in as the local admin?

by grenge

This didn't work the "Local printers" selection is still greyed out. These are setup on laptops that are used by our electrical technicians. We setup one Laptop, then make an image of that one for the 20 other laptops. Each different area may have different printers, so I would like to give them the ability to add their own printers as nessecary.

by henrywi

I assume you are the Administrator, why not give the user an assigned local printer so you don't have the hard time of looking in wish printer you have to print, or just check the admin for the GPO

by grenge

Yes I am the administrator. There are 20 of these laptops and we are working by disk images, so when the new Image comes out it won't have 20 different printers to choose from, just the ones that they need that they can add.

This discussion is closed to new replies.