Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I can install a modem but cannot use it everytime I power on the PC. I get a message "Couldn't Open Port". In order to use it, I have to remove from Device Manager list and reinstall. How am I going to resolve it?
7 replies
by thechas
1. Try the modem in a different slot.
2. Check for updated drivers. (both for the motherboard and the modem)
3. If all else fails, try a modem with a different chipset on it. Some modems just don't work in some motherboards. I have experiancedproblems with specific motherboards and PC-Tel, Lucent, and Intel chipset modems.
Chas
by wahidws
Poster rated this answer
by jimandkathy
I would recommending going to the manufactors site and download newer drivers.
Jim
by wahidws
Poster rated this answer
by edsdave
Check to see if any FAX ware loaded on set. If so probably holding port open. Might also be Logitech Quick Cam camera holding port even if it is USB until you remove modem and readd driver.
by wahidws
Poster rated this answer
by wahidws
This question was closed by the author
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
0 helpful
10 replies
Question Locked
Do You Save Useful Windows Tutorial Videos for Later
0 helpful
7 replies
0 helpful
1 reply
Question Unanswered
Is WSL still relevant in 2026?
0 helpful
0 replies
0 helpful
2 replies