Our forums are currently in maintenance mode and the ability to post is disabled. We will be back up and running as soon as possible. Thanks for your patience!



mother board repairing

By shailendra singh ·
hi, Mr patel,
i wan to how can mother Bord repairing i have use smd because mobile repairing also having done by me , if any cir kit of mother board i found out the problem.please tell diagnostic tool and bios tools , address where i purchase this.

thanks and Regards
shailendra singh

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Answers

Collapse -

There are lots of tools available

by OH Smeg Moderator In reply to mother board repairing

But they are not cheap and are not economical to purchase unless you have a lot of this type of work to begin with. A small Soldering Station just to allow you to solder Surface Mount Components is going to cost you in excess of 45,000 US $ and isn't transportable.

As for the M'Board actual Diagnostic Tools these are Maker & Model exclusive so the M'Boards from one maker but a different Model will not test in the one tester. You lay the M'Board int he tester and it tells you where faults are. As only the M'Board makers have these I have no idea of just how expensive that actually are but at a guess I would consider them very expensive and again they are not transportable.

With VLSI in Surface Mount Technology you do not solder & Glue the components to the Circuit Boards but use a Ultra Violet Soldering Station to first Glue the Component to the Circuit Board and then solder the Legs onto the Pads. These devices place the Component and need to be computer controlled so that a leg doesn't make contact with more than 1 solder pad and destroy the component when power is applied.

These components are also susceptible to heat damage and you have to be very careful not to overheat the components as they get soldered in place.

Over all unless you are working for one of the M'Board makers it's not economical feasible to but any of this equipment and in most cases the individual M'Board makers do not sell it to begin with.


Collapse -

Who is Mr patel?

by Mehul Bhai In reply to mother board repairing

You are addressing to whom?

Related Discussions

Related Forums