4 replies
by patelbrijesh1000 Accepted solution
by kpak44wh Accepted solution
you can buy a 2 1/2 to 3 1/2 ide adapter, plug the laptop hd
in it and the ide cable into the other end of a desktop
computer. set the drive as slave and turn on the computer.
Make sure the other drive is set as master. You can now
open the drive on your desktop and copy the data as cds or
dvds.
by jplconsultant Accepted solution
You can also get a device that you plug your hard drive into and the other end is a USB cable, so you don't have to open your desktop. Jumper the drive as Master, and plug it in to your USB port and you're good to go.
JPL()
by oh smeg Accepted solution
And then recover your data from that. But you need to list the OS that was in use as there can be issues with accessing your Data and if you where previously using XP and had a Version of Pro Installed it's possible that the Windows Encrypted File System has been activated so you not only need access to your Data but the Encryption Key and an OS that will recognise it.
For example if you have moved from XP to Vista you will find that the default E-Mail Clients are different and not interchangeable so you will be unable to access your E-Mail or move it to the new computer without a working OS that was the same type that you used Previously. Also if you have the Data Encrypted in XP and you are now using Vista you will find that the Encryption Methods are different and you are unable to recover Encrypted Data under XP on a Vista Machine.
So while the basic information provided above is perfectly correct it is within the limits of the question that you asked and may not be of any real use to you.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending