Discussion Locked

Motherboard identity help

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'll try to keep this simple.
I have a hybrid motherboard. For the most part, it's your usual intel pentium 166. It's a hybrid board in that it can take both the old-style 72-pin simms and the new-style sdram dimm's.
Right now, it has 2 16-meg simms for the memory (making 32 megs total). I've picked up a new 64-meg sdram dimm, and I know how to install it, but the thing is that the guy at the computer store said I had to reconfigure the mainboard to do so.
I've looked in the bios menu, but it doesn't really have an option to select whether it'll access/use simm or sdram dimm memory.
Oddly, I thought the board itself would detect what ram was on it, so I tried removing the simms and plugging in the sdram dimm. When I boot it up and check the bios menu, it states that the board has 16-megs of ram (which is really odd, since the sdram dimm is actually a 64-meg chunk of memory).
A friend of mine told me I'd probably have to alter the dip-switches or pins on the mainboard itself. Problem is that other that I don't know what brand mainboard it is. (There's no labels saying if it's AMD, Ameritrends, IBM, whatever). So before I go playing with anything, I'd like to know if there's a free program I can download from somewhere that will identify the mainboard. Once I know the make & model, I'll be able to look up the configuration manual on that particular brands web-site).
So I guess my question is a two-parter.

1) can I use both the 72-pin simm andsdram dimm slots at the same time? If yes, what bios or board changes do I need to make? If no, see question 2.

2) How do I get the mainboard to properly recognize that the ram on it is a 64-meg sdram dimm? (I know it's a 64-meg sdram dimm because I bought it at a computer store and it says so right on the chip-card itself)

9 replies

by dmiles

1)The first part cannot be answered until you identify the board manufacturer,some manufacturers suggest that you donot run both at the same time,mostlikely you will not be able to run both,because of memory configuration
2)Go to zdnet or pc world and download the utility called Sandra from SiSoft and run it the freeware version will give you the info about the board and memory

by allan

You could use the FCC id to identify the make & model, I think that that is more likely to give you the information you need rather than a software app. Go to www.fcc.gov & put the numbers in, easier than loading s/w for one time use. BTW it wasn'tcommon to be able to use Simms AND Dimms together but there were a few.

by burtonizer

I have purchased motherboards with both simm and dimm slots.....first, try the dimm in the slot you didn't try...sometimes it likes one or the other slots. Like the person above says, go to the fcc site and find the manufacturer, then try and find the mfgs. site for details on the board OR go to www.motherboards.org ~ the place to find out motherboard information! Also, make sure that the DIMM you bought is 66Mhz ~ older motherboards (some) don't accept the 100, 133 and above DIMMS. Most likely, that may be the problem!

This discussion is closed to new replies.