Software

Ask something
Discussion Locked

Moving the Exchange server

0 helpful
2 replies

by santosh_patel

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have a test Exchange 2000 server, now I want to move it to the actually server... I mean setup a new exchange 2000 server with all required hardware and capacity for 150 users. I dont want to loose any mailboxes that i have on my test server, Howcan i backup my mailboxes,and all the important information and then move it on to the New Exchange server ones it is setup.

2 replies

by riverfreight

You may be able to put a Battery in the Server, most are built to have one for electical back-up - use a Gel-Cell that is 12 volt, a car battery or a trolling motor Battery as long as it is a Gel- Cell - That only means you will be off the air during the move and any other back-up is unnecessary; another way to do the move is to structure your NT space to hold the operation during the move, the desk-top computer has to be able to support it with its Work Enviroment Chip and the ROM Chips tha contain the BIO's, BOO's BI/E's and I think the BI/O's all have to be the most current chips; also the screen is required to be a multi-cell LCD screen as the rest tend to explode.

RIVER FREIGHT

by santosh_patel

Hi,
Thanks for ur help I found the Answer... all I have to do is the ExMerge Utility with is shipped with the lastes version of Service pack with Exchange 2000 and its gonna solve my problem..
regards,
Santosh.

This discussion is closed to new replies.