Hi,
apologies in advance for the rather verbose question…
i use my internal ethernet card to connect to a LAN.
My only use of the LAN is for a TELNET application.
As i have no internet access via the LAN, i use a broadband USB modem.
My problem is that i cannot use the two connections simultaneously…as soon as I connect to my usb modem, my telnet application gets disconnected anc any further attempts to connect receive the following error: Socket Error: 10060 WSAETIMEDOUT
Is there a way of configuring my system to use both connections simultaneously??
Thanks in advance for any help.
If it’s any help here are my ipconfig settings(with some of the info erased):
Scheda Ethernet Connessione alla rete locale (LAN):
Suffisso DNS specifico per connessione: interna.********.it
Indirizzo IP. . . . . . . . . . . . . : ***.***.2.50
Subnet mask . . . . . . . . . . . . . : 255.0.0.0
Gateway predefinito . . . . . . . . . : ***.***.20.1
Scheda Ethernet Connessione rete senza fili:
Stato supporto . . . . . . . . . . . : Supporto disconnesso
Scheda PPP VMCLite:
Suffisso DNS specifico per connessione:
Indirizzo IP. . . . . . . . . . . . . : ***.***.36.101
Subnet mask . . . . . . . . . . . . . : 255.255.255.255
Gateway predefinito . . . . . . . . . : ***.***.36.101
