Discussion Locked
0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an IBM Aptiva pc with a Pioneer DVD 115 DVD player. I am in dvd region 4 but have recently purchased some region 1 dvd's and want to play them on the pc. Is there any free software that will allow me to select the region of the dvd I am watching when I put the disc in? My pc only allows me to select a region a limited number of times and then the pc is set to this region for good. Thanks.
5 replies
by popeye_doyle
Check out this site, you may find what you're looking for :
by argentosw
Poster rated this answer
by nikki96
I have the Pioneer DVD-115.
You need a firmware upgrade. This is not an easy thing. In fact, mine had the original firmware and can not be updated at all. I'm stuck. But if you have the newer firmware, you can flash it regionless.
Beware - flashing the firmware can go wrong so bad the drive becomes useless.
See
http://www.inmatrix.com/
and
http://forum.inmatrix.com/
They have an FAQ and a message board where people are very helpful with the lengthy process.
HTH
Nikki
by argentosw
Poster rated this answer
by argentosw
This question was closed by the author
This discussion is closed to new replies.
Trending Software posts
Sort by Trending
Discussion
Network Printer Works for Everyone Except Me
0 helpful
10 replies
0 helpful
4 replies
Discussion
Is There any Reverse Video Search Tool
0 helpful
8 replies
Discussion
Useful software Tip or Shortcut
0 helpful
0 replies
Discussion
Hello everyone
0 helpful
1 reply