Question Locked

My Computer won't show usb hard drive enclosure

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I just bought the HP m8120n.

I have 6 internals so I bought the I35USBEN i/o internal enclosure so I can xfer what's on the 6 to the 2 externals I have.

Vista won't show it in my computer.

It shows in the device manager.

It connects via usb (just single, not double), and has it's own power cord. Everything lights up (Case/usb)& drives hum as usual. I tried changing the jumpers and I even connected the power supply to the internal power just to make sure it wasn't the supplied cord. I changed the drive letters too.

What's next?

Please someone help me...Please. :(

10 replies

by hal 9000

As this isn't a production ready OS at the moment there are not many people who know it too well your best bet is to ring the suppliers for technical help with the version of Vista that you have installed.

But if the Computer Management see the Partitions you can import the drives if it shows them as RAW or unformatted you may have a problem.

Col

by hal 9000

http://preview.tinyurl.com/2er9uo

If so what HDD do you have in it and what is it set to Master, Cable Select or Slave?

The drive should be set to Master and it should appear in the Drives under Computer Management where you can format it up if it has not been formatted or is a New HDD.

If the Drive isn't jumpered correctly it will not show up in the Drive Manager but otherwise it should and you can format, open or whatever is required from here.

Col

by bensonhurst26

I've tried a Seagate, WD and Maxtor internals in it. I have moved the jumpers a few times on each of them. They are not blank or else I would just reformat them.

Thanks you so much for all your help.

by hal 9000

Vista is the most likely problem here as it has limited ability to read older Windows Partitions. If they are not NTFS they will be invisible to Vista.

Seagate & Maxtor are now owned by the same company and should be set to Master. Not sure about the WD Drive as I don't use them after some bad experiences with a few WD Drives going bad while still loading a new computers but they should also be set to Master unless the Drive Enclosure Instructions have something different listed.

But if these are FAT32 they will be unreadable to Vista which could be part of the problem.

Col

by bensonhurst26

I'm just going to return it and try another...I will let you know the outcome.

Thanks for being so kind.

by bensonhurst26

So I called the company and the told me that I need to format any hard drive before I can use it....I returned that one and bought another by Rocketfish....same problem...I called them...they tell me I need to format the drive before I can use it.

WHY THE HELL WOULD I WANT TO FORMAT MY DRIVE AND LOOSE EVERYTHING?!?!?!?

He says we should make that clear on our packaging...

SIGH!!!

by pkutzer

If the hard drive shows on the System Manager, you can choose it there and format it. This works, I just done it. Don't format you main hard drive, you'll loose all the data.

by bensonhurst26

It does show on system manager...Are you saying if I reformat it there it won't wipe out my hard drive? I'm sooo scared to do that...I can't loose this stuff.....I'm a donkey with stuff like this...If at all possible can you walk me through it...like go to system manager...right click the drive and select format...Is that the steps....I THANK YOU SO MUCH for offering this info...Please, if you have the time, respond.

Thanks,
Frankie

This discussion is closed to new replies.