Windows

are you sure the model # is MR 374? There are not archives at netgear for that model #. there is a MR 801.2 wireless router.

Please verify your model #.

I saw the same thing mr314 not mr374. If the address below does not work you can go to a cmd prompt and type ipconfig/all if your lan\wlan is connected to router and getting an address from the router your default gateway is the address you would enter to setup the router.

If by any chance you can't log in the router should has a reset button press and hold until the light flickers then attempt again if it does not have a reset button. If it does not have a reset button you will have to contact netgear so they can walk you through the process of upgrading the firmware.


Below is the default address to their routers:
netgear 192.168.0.2
user = admin
password = password
password = 1234 (old routers)

Probably it is configured to assign IP addresses like a DHCP server. You should be able to connect a client to it and IPCONFIG would show you the address of its DHCP server - the router.