Discussion Locked

Network Adapters disappear in W2K server

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
A few times, on different W2K servers, I've seen the network adapters disappear from the control panel. Device manager shows them, and IPCONFIG shows them, but I can't administer them properly. A reboot will fix it, but I can't always reboot a production server. They are Dell 6400's with Intel NICs, W2K SP3. Has anyone seen this?

7 replies

by bchesmer

W/O more specific info, the only thing I can dig up is to update the drvrs for the NIC's.

by curlergirl

I'm a bit confused - if they show in Device Manager, where is it that they are "disappearing" from? Are you saying that they're not there when you go to the network properties window? If so, this sounds like it might be a connection problem - either the card is dropping off the network, losing its binding to TCP/IP or something like that. Then when you reboot it refreshes and works again. When this happens, are you still able to connect to the server from workstations? Do you see any system log errors or does the icon appear in the systray indicating that the network card is disconnected? More info would help.

by shaunjanzen

I have 3 Dell 4600's and 1 1650 and it has happened to all of them. The only thing that they had in common is that they were Dell and I had installed the OS using Dell's server assistant CD as well as SP3. My suspicions are that the Server AssistantCD is the culprit or SP3. I have since re-installed Win2k server without the server assistant CD and went back to SP2. All is working well now.

I have found several people on other forums that have had major problems with there computer browsing after installing SP3. We had this problem as well and it caused many headaches. Have you had any issues with this?

Shaun

This discussion is closed to new replies.