Windows Forum

Ask something
Discussion Locked

Network BIOS session limit

0 helpful
3 replies

by christian.pawlowski 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've a NT4 server with SP6 in addition to Terminal Server Citrix Metaframe 1.8.
We usually map drives to CDs located on a AXIS CD server. From time to time, and from the server console, I'm not able to access these drives, although they are available from other workstations. When I want to map a drive again to this AXIS CD server, I'm receiving the following message: "The network BIOS session limit was exceeded". Mapping a drive to another server works fine.
It seems that I've the same problem from my W2K workstation.
Any idea? Thanks

3 replies

by joseph moore

The "Network BIOS session limit exceeded" error is a maximum connected users error. You should get this when the max number of allowed connections on a remote system has been reached.
So, if you are getting this when you try and connect to a CD server I would check with AXIS. See if they can tell you how to increase the max connection limit on the CD server.

hope this helps

This discussion is closed to new replies.