Windows Forum

Ask something
Discussion Locked

network path not found

0 helpful
2 replies

by bjorgensen

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Running SBS2000 server and WIN2K clients. Installed and then uninstalled ZoneAlarm. Now can't connect to network domain. Says "network path not found"

2 replies

by simon

If you thought you need a firewall you probably still do so I would re-install zonealarm again.

You need to create a Trust zone for your network to work.

Open Zone Alarm then click on Firewall then Zones, then add a zone, I normally put in a range, like 192.168.0.1 - 192.168.0.100.

Click apply then your will be able to connect to the network.

good luck

by pierrejamme

Any version of ZA 5x can be disastrous. Is that what you used?
Check out there user forum at: http://www.zonelabs.com/store/content/support/userForum/userForum_agreement.jsp
this is from the forum Moderator:
There are several possible issues:

1) Your browser may still have proxy settings (ZA does NOT use these but some bundled software might)

2) You did not completely and properly uninstall ZA. In that case use our Instant Support (just type "I uninstalled ZA and have no access") or use the direct link below:

http://nh2.nohold.net/noHoldCust25/Prod_1/Articles55646/ManualUninstall.html
Here is another useful site for removal:
http://don.hoover.net/index.html

I Recommend ZA Pro v 4.54.
Download ZoneAlarm Pro 45.594.000: http://tinyurl.com/36ss4
ZoneAlarm Plus 45.594.000: http://tinyurl.com/35ym6
ZoneAlarm Free 45.594.000: http://tinyurl.com/3fwor

This discussion is closed to new replies.