Discussion Locked

Network Printer Issue

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Here's the basic layout:
NT 4.0 Domain with about 10 workstations. Most running NT 4.0.

There is an HP 1050C DesignJet plotter with a Jet Direct card. One computer in particular has the following problem: He has the printer in his printers folder and can plot to it from Word, Cadkey and other programs. BUT, if he launches Excel, then tries to select File|Print, that particular printer doesn't appear in the drop-down. In addition, from within the printers folder, we can't make that printer the default. It just doesn't accept it. Right-click, select Default and it doesn't "take".

I removed it and re-added it with the current drivers from HP's web site but it didn't help.

Brian

5 replies

by blaine moore

Try sharing the printer connection from off another another workstation, and then adding the printer from that workstation to set as default.

by an_it_guy

Check if you have Admin rights on the workstation that you are logging on and trying to default the printer.
When in 'Printers' folder, try double-clicking that printer and getting into its properties page. Try to choose default printer from there.
If this doesn't work, you can try deleting all other printers - which will make the remaining one as the default. But before deleting, make sure you have all drivers needed to re-add them again.
Cheers.

This discussion is closed to new replies.