Discussion Locked

Network problems

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a computer that will not hit the Lan unless I log onto the Internet first. It is a win98se computer and this happens every time.

7 replies

by quintar51

well, that shouldn't be.

is this machine part of a domain or a workgroup?

are you able to ping any other machines by IP?
if so, are you able to ping by name?

is this machine using a static IP or is it getting one from a DHCP server?

by larrys

I agree to the other response.
Make sure your WorkGroup or Domain name is correct, this is a big key.
Next check to see ift you are getting or have the correct IP asigned to your nic card. (Go to a command prompt and type WINIPCFG then in the window slide down to your NIC card and look at the IP, is it in the correct address range? If not click on RENEW if this doesn't get you the correct IP then your DHCP server is no assigning you one T'Shoot that. If you had a static IP make sure it is inthe correct address range. If all else fails seek your IT experts and ask them what you IP should be. Your default Gateway can be a clue as to were you should be in IP's

by larrys

I agree to the other response.
Make sure your WorkGroup or Domain name is correct, this is a big key.
Next check to see ift you are getting or have the correct IP asigned to your nic card. (Go to a command prompt and type WINIPCFG then in the window slide down to your NIC card and look at the IP, is it in the correct address range? If not click on RENEW if this doesn't get you the correct IP then your DHCP server is no assigning you one T'Shoot that. If you had a static IP make sure it is inthe correct address range. If all else fails seek your IT experts and ask them what you IP should be. Your default Gateway can be a clue as to were you should be in IP's

This discussion is closed to new replies.