Discussion Locked

no more internet-access-only when firewa

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

on my second pentium 1(200mmx-winme) i suddenly have no more access to the internet via cable(ethernet-card). but only when firewall is activated.
these are my observations:
1. i have left the pc for several hours when it was still online. later i recognized that firewall was deactivated! i think i must install a very loud sirene!

2. when checking everything seem to be ok.

i check firewall -settings. pc 1(working) had additional firewall-programm in the settings. i still do not understand why. i deleted this-maybe this was wrong, but i have still internet-access. pls explain why i need this.
on pc 2(internet not working) i do not have this firewallprogram set in the settings.
btw: on pc1(internet ok) i have additional symantec nav emailprotection automatic setting.
maybe this was set when i tested the new security advice(which did not work) described in http://www.grc.com

the main curious fact is showing an intel dc 21140 pc fast ethernet adapter when using winipcfg command.
but i have an smc 9322bdt ethernet card 100/10

i replaced it and deleted all setting in system and network and reconfigurated, nothing helped.

i will now run a new av-test, although it was made 1 day ago.

6 replies

by ann_m

what operating system are you using on computer system 1? I had windows Me Installed on my pc networked thru a router/hub and had the same issues you had.I never had any issues when all my systems were either 98 or xp/98 mixed the problem seems to be related to win me.

by europanorama

yes winme, which i now have on both pcs for a long time(2 years) seem to be related to the open firewall because i had additional entries in network(three is the max. otherwise it will not work. my last actions/observations were. i could see this intel dc 21140-network ethernet adapter in network list. 1. i tried using this by deleting the installed card. but at next bootup it was found again.
2. i deleted intel dc 21140 which worked but winipcfg shows me this wrong card.

i will now try to find a google-search. and if i do not find any tip in my other forums i will reinstall firewall. strange thing: if firewall is deactived, internetaccess is working.

by whw

If it works with the firewall disabled, then IT IS WORKING. You don't say what firewall you're using so I can't be more specific. But you should have a log which tells you what is being blocked when the firewall is active. Examine it, sounds likeyou need to open some ports to get ICS working.

by europanorama

i could solve the problem but only after installing new ethernet-card, deinstall/reinstall norton firewall(deleting all restrictions didnt help). there was still the wrong ethernet-card shown in winipcfg. i cleaned the drive with speedisk etc. and is now working on a new card. maybe the old one was too old, but i dont think so. it was a hack when firewall was deactived. it just happenend within these hours.

This discussion is closed to new replies.