Windows Forum

Ask something
Discussion Locked

No More IRP Stack Locations

0 helpful
6 replies

by guru kumar

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi !

I am using NT Server 4.0 I am facing one problem that whenever any person is trying to connect to my Computer from the network and then executing (Opening) any shared file from my Computer, My machine shows the BLUE SCREEN showing No_More_IRP_Stack_Locations(0x35)

I visiter the site of Microsoft and no solution is available there.

I have tried to increase the IrpStackSize in the Registry.
But it is not working

Can anybody help me ?

Thanks in advance,

Guru

6 replies

by ann777

Q225782

You can increase the IRPStackSize value. You must first add this value to the following key if it is not already present:

HKEY_LOCAL_MACHINE SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters

Value Name: IRPStackSize
DataType: DWORD
Default: 0x4
Maximum: 0xC

Increasing this value requires some memory from the non-allocated memory pool, but the impact should not be noticeable.

NOTE: It is not always advisable to set the IRPStackSize value to its maximum of 12. Generally, you should start the value at 4 and work your way up, increasing the value by 1 each time. The problem may still occur if the value is too high.

This error message may also occur after installing or uninstalling virus-scanning software. You may want to remove the virus-scanning software or increase the IRPStackSize if you need to use the software.
----

Go to the registry and increase the irpstacksize by one (start at irpstacksize = 4). Reboot and test again. Repeat until you find your ideal irpstack size.

This discussion is closed to new replies.