Question Locked
0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
k...so im kinda a dumbass and couldnt get my laptop to boot properly or any power to the monitor after taking it apart, then 2 wks later realizing that the memory module was not pushed all the way in...so now it is booting up,i can hear windows starting and the lcd backlight is coming on but now there is still no video on the screen. I didn't mess with the monitor except to remove it in the initial disassembly (which i did to solder the power jack, working quite well now) any ideas what could be the prob? I did try hooking my desktop monitor up to it and there was no reaction at all.
3 replies
by bonfire817 Accepted solution
Clarifications
by older mycroft Accepted solution
Perhaps it's approaching the cut-off point now where you'll realise you've maybe interfered with the video signal supply.
Does your laptop have the video chip on a daughterboard / subassembly? If so, maybe it also needs 'a push'.
Another point: the micro-ribbon cable to the monitor is notorious for not enjoying being handled, particularly once it has some miles on the clock.
by bonfire817 Accepted solution
thanks again for the feedback :)
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies