Our forums are currently in maintenance mode and the ability to post is disabled. We will be back up and running as soon as possible. Thanks for your patience!



Nook simple touch back cover fixing

By neermohan ·
its screen frozen. not reseting.
I opened back cover, battery taken out and again fixed. it restarted again working.
but when I tried to fix back cover it again hanged.
when I keep cover out it works otherwise not.
pl suggest me what to do?

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Answers

Collapse -

Sounds like either the cover is pressing on a wire or cable

by robo_dev In reply to Nook simple touch back co ...

and causing a short circuit, or there is a cracked solder connection, and the cover puts force on a cable, opening the connection.

Have never looked inside a nook....If there are any ribbon cables, carefully unplug and re-seat them, there typically are hinged locks which hold ribbon cables in place.

Inspect any visible solder connections, especially for ribbon connectors, under magnification to see if you see any cold solder connections or cracked traces.

Also look closely for signs of a ribbon cable or wire misrouted/pinched/damaged during assembly.

If there is a water detector patch (white sticker with pink dots), make sure it has not gone all pink (if unit got wet).

Related Discussions

Related Forums