Windows Forum

Ask something
Discussion Locked

Nt 4.0 server network

0 helpful
8 replies

by tbui

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I set up a development network, PDC, BDC, member server. When the PDC first boot up, The Bdc and the member server can browse the network and see the PDC, But after one hour,
The PDC drop off from the network neiborhood from the BDC and the member server.
I set up the host file/Dns/wins. But the problem still exist. Please help.

Thanks in advance.
Tbui@medcellbio.com

8 replies

by mgonzales

Make sure on your WINS IP settings that you have an entry for both the Primary and Secondary. Do not leave these blank.

Good Luck!

by green lantern

Check the transports you have bound to your NICs. The master browser only maintains a list on its first bound protocol. If you are binding multiple protocols, only the first will be made available for a browse listing.
If you are running with multiple protocols, try removing all but one. Once you have done this, adding the other protocls back will place them later in the binding order.

ralph

by tbui

I uninstall the netbeui protocol and leave Tcp/ip alone, Reboot the server ( PDC) and also the BDC the porblems still exist.

This discussion is closed to new replies.