General discussion

  • Creator
    Topic
  • #2083512

    NT Server 4.0 Devices accidentaly disabl

    Locked

    by enlightmnt ·

    Control Panel-Devices were accidentally disabled. The devices are DISK, FTDISK, and AIC78U2. Their setttings were originally set at “BOOT”, now is “DISABLED”. The server was rebooted and came to a blue screen with the message STOP: 0x0000007B (Hexa…) Inaccessible_Boot_Device.
    Then provided a memory dump message at the bottom of the screen. Tried rebooted using last known config, but no help. How could we re-enable or change the boot status of those devices? Please help.

All Comments

  • Author
    Replies
    • #3770200

      NT Server 4.0 Devices accidentaly disabl

      by ncc-chief ·

      In reply to NT Server 4.0 Devices accidentaly disabl

      If you have a Recovery Disk for this NT installation you can run NT Installation and select option (R) – to recover an existing installation. Should do fine. Last time it worked for me on NT4 SP6a.

    • #3770582

      NT Server 4.0 Devices accidentaly disabl

      by andreas.vavra ·

      In reply to NT Server 4.0 Devices accidentaly disabl

      If there’s enough space left on your harddisk, install a second NT4 Server into a *different* directory (i.e. \NTNEW), install the same SP as it was installed on the non-working installation. Open regedt32 and load c:\winnt\system32\config\system asa hive. Goto \

    • #3874012

      NT Server 4.0 Devices accidentaly disabl

      by enlightmnt ·

      In reply to NT Server 4.0 Devices accidentaly disabl

      This question was auto closed due to inactivity

Viewing 2 reply threads