Question

Locked

Omnibook 6100 Bios Reset

By jprice ·
I believe there is no way to reset the bios on the HP OmniBook without replacing the chip or a chip reader.

I didnt know if any of you had a Trick I might try.

Thanks.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Why reset it?

by The Scummy One In reply to Omnibook 6100 Bios Reset

Just follow these instructions instead.


Use a magnet on the HDD (very powerful one). Then toss the unit as far as the eye can see. Afterwards go hunt down the pieces and put it in the recycle bin...

Problem Solved!

Collapse -

Oh, btw -- On those systems

by The Scummy One In reply to Why reset it?

you need to call HP and get an unlock code to reset the BIOS if I remember properly.

Collapse -

reset chip

by sycan2 In reply to Omnibook 6100 Bios Reset

get a copy of the firmware on white paper
then look for the reset switch code. it clears all data on the chip. so it will work agin. If you install drivers for a sound card and didn't turn off the motherboard sound in your bios, you can lock your motherboard chip working. turn on the reset code by inserting it in the setup inf file that comes with your driver install for the mothboard, or install the firmware with the reset turned on works on Realtek Alc850

Back to Windows Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums