I have one IP in net connection two LAN card in a PC. I would like to share it to other PC by Using a switch. My operating system is Winxp. I need a total solution how I could establish this connection. If any other device needed also inform me.
You do not need 2 lan cards to do this
Connect both your pcs to the switch, connect the switch to the broadband modem.
If you do not have an ethernet connection on your modem you need to change it for a broadband modem/router, you will then not need the switch
You have to use internet connection sharing option using your dialup properties,
* Internet Option
* Connection
* Select your dialup connection
* dialup properties
* settings
* Properties
* Advanced
* Enable internet connection.
Ok first off what type of Connection is it?
If broadband simply use a ROUTER to connect them both. (a swith will not work since it does not have the ability to assign IP addresses.
Wire it thus
Modem
|
|
Router
| |
PC1 PC2
You can share a connection with 1 pc to another but it will cause a noticeable slowdown on the 2nd pc.