TechRepublic|Forums|Windows

Windows

Question

  • Creator
    Topic
  • March 7, 2007 at 4:46 pm #2268254

    Overclocking Failure !!!!

    Locked

    by ernesto.acosta · about 15 years, 2 months ago

    Anyone out there run into this: I just built a system with an ASUS P4C800-E Deluxe mobo with Intel P4 3.0 Ghz; 2×512 Crucial pc3200 DDRAM.
    I EZ Flashed the BIOS to v1021. Problem is on Boot I get a message saying overclocking failed and giving me the option of pressing F1 to go into the BIOS or F2 to continue with loading defaults. Pressing F2 allows me to continue but the issue is I haven’t done anything to overclock and to the best of my knowledge I am already running with defaults set in the BIOS. Has anyone out there run into this

    Topic is locked This conversation is currently closed to new comments.
  • Creator
    Topic

All Answers

  • Author
    Replies
    • March 7, 2007 at 4:46 pm #2515195

      Clarifications

      by ernesto.acosta · about 15 years, 2 months ago

      In reply to Overclocking Failure !!!!

      Clarifications

    • March 7, 2007 at 10:16 pm #2515108

      Use F1

      by bhatnagar_nitin9 · about 15 years, 2 months ago

      In reply to Overclocking Failure !!!!

      and go into BIOS. Find the overclocking feature in the system setup and disable it by pressing page up/page down key. Save settings and exit. Check the same upon restart.

    • August 13, 2007 at 1:27 am #2618320

      Faulty RAM

      by tobywilson · about 14 years, 9 months ago

      In reply to Overclocking Failure !!!!

      Hi there,

      I know the reply may be comming a bit late but I experieced the same problem. After checking everyting else I found that the RAM modules were causing the problem.

      Cheers,

      Toby

  • Author
    Replies
Viewing 2 reply threads