Search

Windows

General discussion

Gravatar
Locked

PC Card (PCMCIA) Troubles...

By peter.berger@genexsrvcs ·
"Windows is not able to identify or use the inserted PC Card device because there is no memory area available to communcate with the device. You must make a memory area available before this device can be used. Check your computer's CONFIG.SYS file for a memory manager that is excluding upper memory regions between A000 and FFFF."

Dell Inspiron 7000, Win98SE, 3Com 3ccm156b 56k modem. 64MB RAM.

Steps already taken:
Tried 2 different modems in both slots.
Deleted all networking/modems.
Reinstalled all networking & modems.
Checked config.sys (it is empty).
No device conflicts in Dev. Mgr.
No new software installed before error message started appearing.
Really stumped. Technet offers nothing. Please help... Thanks...

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
+ Follow this Discussion ·
| Thread display: Collapse - | Expand +

All Comments

gravatar
Collapse -

PC Card (PCMCIA) Troubles...

by CoreWarrior In reply to PC Card (PCMCIA) Troubles ...

Run MSCONFIG,AT the first Tab-general-click on the Advanced button.uncheck the EMM exclude A000-FFFF.then,restart.
also check config.sys for a memory manager and rem it out.

gravatar
Collapse -

PC Card (PCMCIA) Troubles...

by peter.berger@genexsrvcs In reply to PC Card (PCMCIA) Troubles ...

Sorry -- didn't work. Same results. Laptop was time critical so I Fdisk'ed and started from scratch. Thanks for the tip anyways...

gravatar
Collapse -

PC Card (PCMCIA) Troubles...

by peter.berger@genexsrvcs In reply to PC Card (PCMCIA) Troubles ...

This question was closed by the author

Back to Windows Forum
3 total posts (Page 1 of 1)  

Start or search

Related Discussions

Related Forums