Windows Forum

Ask something
Discussion Locked

PC SLOW DOWN

0 helpful
9 replies

by kstarasu0555

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
WHEN WORKING ON A/C SOFTWARE MY PC(P4,40GB,256MHz,MS SMALL BUSINESS)SPEED BECOMES VERY VERY LOW IN OPENING THE NEXT WINDOW

9 replies

by pinoy_teknik

I just want to make sure that

..... your chipset driver is properly setup, including some of the other device driver. if there is an update, update it.

.....You have proper cooling system

this is the most common factor of slowing the machine. And wait for Chas he had a lot of answer....

Pinoy_Teknik

by bohicam1

Are you referring to Autocad? If so, how big are your drawings? How many images comprise one drawing? First I would recommend alot more Ram, secondly, a decent video card. One of my clients recently switched to the Elsa Synergy 2 card on recommendation from out Autocad software supplier. It has taken a huge load off of the processor. There is a huge difference in video cards made for gaming and those made for 3D drawings. Check the specs for ideal cards from your software supplier.
Good luck!
Mike

by grey_woolf

Temporary files:
C:\WINDOWS\TEMP
C:\WINDOWS\TEMPORARY INTERNET FILES

1. Empty these directories.
2. Empty the recycle bin.
3. Defragment the hard drive.

This discussion is closed to new replies.