Hello , I brought a 120 gb hdd for my computer.
Motherboard Properties
Motherboard ID 08/28/1998-i440BX-W977TF-2A69KF29C-00
Motherboard Name ECS P6BX-ATX
Front Side Bus Properties
Bus Type Intel GTL+
Bus Width 64-bit
Real Clock 100 MHz
Effective Clock 100 MHz
Bandwidth 800 MB/s
Memory Bus Properties
Bus Type SDR SDRAM
Bus Width 64-bit
Real Clock 100 MHz
Effective Clock 100 MHz
Bandwidth 800 MB/s
Motherboard Manufacturer
Company Name Elitegroup Computer Systems Inc.
Product Information http://www.ecsusa.com/products
BIOS Download http://www.ecsusa.com/downloads/bios.html
I have tried to find the BIOS but have had no luck. So, I went and brought a ultra 133 pci card for my seagate barracuda hhd. I have installed the pci card and the computer will not take it. The drive Primary and master registered as none. Then the direction instructed me to used window 2000 boot disk and install as a sisi or raid controller.I followed the step and still this card is not registering. My hard drive nad the BIOS in this card becomes disable. I do see it as a mass storage on my irg. No conflicts. I have gone into cmos and change all hhd type to auto or lba no change. I would like to know what I can do to get this card to work in my computer. I presently have the jumper setting to accept only 32< gb I have lost 88 gb of space or have I?If the computer is not registering the other 88 gb where are they. I am sorry for a long post but I wanted to be very detail about this so I can get good feedback. Thanks