General discussion

Locked

PCI Serial Cards

By Brent T ·
I figure I may be in trouble on this. I am running a DOS AP under Win 95 and require more than two com ports. The problem is the lava card I'm using is PCI - NO JUMPERS!. So the re-direction software re-assigns the com ports. Problem is they areonly recognized under Windows. My app is MS DOS. Any suggestions on how I can make the Lava Boards COMM ports available under MS DOS and re-direct and mode them. I'm running a brand new Compaq EN series computer. No ISA slots only PCI.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

PCI Serial Cards

by richard_barsby In reply to PCI Serial Cards

Hi dou you run the dos program in a window if so I believe it should work.

Rich

Collapse -

PCI Serial Cards

by Brent T In reply to PCI Serial Cards

Poster rated this answer

Collapse -

PCI Serial Cards

by cdobbin In reply to PCI Serial Cards

you have the wrong version printer installed, and check the color of your processor, and brent you know you have to accept this answer!

Collapse -

PCI Serial Cards

by Brent T In reply to PCI Serial Cards

C Dobbin, I don't think the colour of the CPU makes much of a difference. I tried using some crayons to color it red but it didn't make any different, in fact now I can't even get the PC started. Any suggestions!

Collapse -

PCI Serial Cards

by Brent T In reply to PCI Serial Cards

This question was closed by the author

Back to Desktop Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums