plz help me..........

By vijaydga ·
Check Corect Value of CPU
Press F1 to enter SETUP,
Check if you have the correct value of CPU, or try to change it.

Do you hear a "beep" when starting your computer?
No there is no beep what shall i do with that
what has to be done
how to correct i want the sollution

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

No beep means the power on self-test has not completed

by Absolutely In reply to plz help me..........

The solution is to fix your hardware problem that is indicated by the lack of beep, not change the information in the BIOS.

Collapse -

If the BIOS is not detecting a valid CPU value

by NickNielsen In reply to plz help me..........

Your CPU is most likely bad and will need to be replaced.

Collapse -

I've seen this several times now and on every occasion

by OH Smeg In reply to plz help me..........

The problem has arisen because the CPU is not allowed to Auto Detect and has been Manually set to the wrong value. Generally the wrong FSB and Multiplier have been set to the correct Speed of the CPU.

However because the Specifications are wrong you need to correct this setting in BIOS and then the POST will finish and beep.


Back to Software Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums