Windows Forum

Ask something
Discussion Locked

port forwarding

0 helpful
3 replies

by d squared

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
K, here is the problem. I have a device on my network at 10.0.0.30 I need to get to it from an outside address on a certain port lets use 2222. My static ip is 192.168.0.234 (not really but lets use it :) ). So what do I have to do to my NT machine (With Proxy 2.0) to make it so that when I come into 192.168.0.234 on port 2222 I get to 10.0.0.30 on port 2222

3 replies

by xgenius

You could change the particular port selection criterion to allow port switching(Transparently) also depending on your hardware while you may be able to share ports you might not be able to use them simultaneously...

This discussion is closed to new replies.