I do surveillance interfaces at super markets and im trying to capture information from Deli scales and overlay it on CCTV cameras.All scales uses the same port and the only way to identify what information is from what source is by its Ip adress. Software found on the internet only allows me to allocate one forwarding per incoming port. So im getting it right, but only one as all the software gives me a port conflict error. I need to identify by every scales Ip adress on through on the network on the same port the info , then forward it to each scales unique port (7080 – 7099 ) to my NVR server as the dvr only allows one to allocated one port to each camera.
For example : Port 50022 Ip 10.4.7.88 Data must forward to Port 7080 Ip 10.4.170.187 and Port 50022 Ip 10.4.7.89 Data must forward to Port 7081 Ip 10.4.170.187 and Port 50022 Ip 10.4.7.89 Data must forward to Port 7082 Ip 10.4.170.187,
Hope it makes sense