General discussion

Locked

Port No. for IP Client?

By chris.riley ·
I need to configure some NT clients to talk IP to a NetWare 5.1 (SP2a) Server. Because the clients will need to go through a firewall I need to know what ports they will use?

Also, are there any other settings on the client that need changing (from the default)? What version of the client should I use?

Does all the above apply for Win 9x.?

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Port No. for IP Client?

by rbgnr111 In reply to Port No. for IP Client?

here is a list of ports novell uses for different products. the ones you'll probably need to pay the most attention to are ncp and slp ports.

SCMD tcp 2302, udp 2645
SLP tcp 427
NCP tcp 524, udp 524
VPN tcp 213, udp 2010
NWIP udp 43981, udp 43982
DSS tcp 396, udp 396
DNS tcp 53, udp 53
IPTUNNEL tcp 213, udp 2010
IPRELAY tcp 213, udp 2010
VPTUNNEL dto.
NAT tcp, udp and icmp 55000-59999
SSO udp 3024

http://support.novell.com/cgi-bin/search/searchtid.cgi?/10014320.htm

Collapse -

Port No. for IP Client?

by chris.riley In reply to Port No. for IP Client?

Poster rated this answer

Collapse -

Port No. for IP Client?

by FaisalMasood In reply to Port No. for IP Client?

Try 'Active Port' a small utility for checking active port as the name suggests. Go to download.com or search at google.com

Collapse -

Port No. for IP Client?

by chris.riley In reply to Port No. for IP Client?

Poster rated this answer

Collapse -

Port No. for IP Client?

by chris.riley In reply to Port No. for IP Client?

This question was closed by the author

Back to Networks Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums