General discussion

Locked

Printer problem Epson LQ-300

By miftaulhaque ·
My friend bought a printer Epson LQ-300 which has got parallel cable to connect to IBM pcs. Now he wants to connect it with his MAC computer. Is is possible to connect it to MAC and get print out from MAC.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Printer problem Epson LQ-300

by mickrose7 In reply to Printer problem Epson LQ- ...

The problem will be locating a driver for the printer. The mac has generic river that should run the printer though they may not have all the elemnets. the IBM prontoprinter should work

Michael

Collapse -

Printer problem Epson LQ-300

by miftaulhaque In reply to Printer problem Epson LQ- ...

Poster rated this answer

Collapse -

Printer problem Epson LQ-300

by BV2 In reply to Printer problem Epson LQ- ...

Yup - before you do it, though, you will need to change the printer settings to serial output. Directions are listed in the manual, or you can hold the form feed button down then power up the computer. It will enter into programming mode and also give you an option to print out an instruction sheet. A downloadable manual can also be forund at epson.com.

Collapse -

Printer problem Epson LQ-300

by miftaulhaque In reply to Printer problem Epson LQ- ...

Poster rated this answer

Collapse -

Printer problem Epson LQ-300

by miftaulhaque In reply to Printer problem Epson LQ- ...

This question was closed by the author

Back to Windows Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums