Question Locked

Printer/USB Problem.... Please Help!

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have Windows XP.
I also have a Canon multi-function printer.
There's two computers, one in the living room - one in my bedroom...
Recently switched from DSL to cable.
Have a router.

My printer won't work!
When I plug it in to the USB port
(also when I plug my flash drive in!),
the computer shuts down!

What's wrong?

I've ran virus scan.
Tried up-dating drivers.

Please help!
Thanks.

5 replies

by cg it

or take the comp in to Best Buy eg Geek Squad and they can fix it.

by patb071

If you are going to take it somewhere take it to a local shop where you will get dedicated service.

Try going into device manager Uninstall the device and reboot the computer without anything plugged into the USB device. It will automatically install the drivers and you should be good.

by peconet tietokoneet

Why i say this is because all USB devices need power from the USB ports. If lower than 350 wattage then up it to at least 500 to 600 watts.
NEXT:
Boot into your BIOS and make sure that (in the USB section) "Legacy" is marked "Enable", then "save and exit". Reboot your computer and see if you have the same trouble/issue. ALSO, update your memory (ram) to at least 2gb or 4gb, this will make it more stable.

by dpalsen

OK...first, let's get a couple of things straight. Not to start a flame war, but:

1) If the guy wanted to get Best Buy support, he wouldn't have posted here!

2) It can't be a problem with the amount of power, as the Canon uses a separate "brick".

Now, for an ACTUAL ANSWER! Try going into the device manager, and delete ALL USB devices, as well as the hub. Basically, anything that says USB, delete. Then restart the machine, and it should recognize both and make them usable. I had this issue with a USB flash drive, and that's the way I solved my issues.

This discussion is closed to new replies.