Discussion Locked

Problem printing JPG image to USB HP750

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am using a Toshiba Satellite running Windows ME, 256MB memory, 20GB disk 12GB free space. I can print JPG images up to 450KB without problems, when I attempt to print an image larger than 450KB the system generates an error message "Unknown system error printing to DOT4. Restart Windows and try again." Obviously a reboot does not fix the problem. How can I troubleshoot this problem and resolve it.

2 replies

by thechas

It is possible that you are running out of virtual memory, or hard drive space for the print spool file.

A 450MB JPEG could easily convert to a 8MB TIFF or BMP file. Your graphics or printing program needs to de-compress the JPEG so that it can print the image.

Check your virtual memory setting.
Right Click on My Computer, and select properties.
Select the performance tab, and click on virtual memory.
Verify that virtual memory is not set to a fixed size of under 750MB.
You want to allow virtual memory to be at least the difference between real (RAM) and 1GB.

Next, check your printer settings.
You may be able to help things if you switch spool settings so that the printer begins printing before the spool file is complete.Chas

by dvoncannon

Virtual memory is set to let Windows manage with no lower or upper limit hard set. There is 10GB of free disk space available to use for virtual memory. The printer is set to begin printing before the spool file is complete. No change was required to either setting so the original problem still exists.

This discussion is closed to new replies.