Question

Locked

Problem with my Default Gateway

By abdul_basheer ·
Hi All

I have a network connected with 500 systems having network configuration of 192.168.0.1-192.168.1.255(subnet:255.255.254.0)and with the default gateway of 192.168.0.2 . The systems with IP range 192.168.0.0-192.168.0.255 can able to access internet where as the systems with ip range 192.168.1.0-192.168.1.255 are not able access internet.can any body help me in this regard

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Edited

by kylej In reply to Problem with my Default G ...

edited

Message was edited by: beth.blakely@...

Collapse -

HE IS THE HACKER!!!

by UserDeletedByRequest In reply to Edited

YOU WAS THE ONE WHO WAS TRYING TO HACK YOU NEXT DOORS WIRELESS!!!!

Collapse -

mmm

by DaveDXB In reply to Problem with my Default G ...

Default gateway is on 192.168.0.2

IP's on different Subnets will not be able to access 192.168.0.2

Thats why 192.168.1.* will not be able to connect to 192.168.0.* because they are on different subnets.

Unless you put a router between them to allow the data to go through.

On the router, you will be able to specify the external link 192.168.0.2 as the Internet source, and the Internal link as 192.168.1.*

Collapse -

looks like you have two different ip shcemes

by gubi4 In reply to Problem with my Default G ...

the gateway you are using is fine for the first set of IPs, but not the second and that's where your problem is. you need to use a different class of IP, maybe a class b setup allowing more addresses. try this site........

http://www.t1shopper.com/tools/calculate/ip-subnet/

Back to Networks Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums