Question

Problem With New Build

By max0829 ·
Tags: Hardware
I have the new rig all assembled with the exception
of the video card (still waiting for the Gigabite RX560).

Case- http://www.minicase.net/minipc-T3-J1900T1.html
CPU - https://www.newegg.com/Product/Produ...82E16819113410
Mama/Board - https://www.newegg.com/Product/Produ...9SIA6BM56U1172
PSU - https://www.newegg.com/Product/Produ...95&ignorebbr=1
Memory - DDR3

In the test run, I disconnected the the HHD and turned on the power. The CPU cooler fan
cycled fine, however, three other LED fans would very briefly stop (1/10 of a second) and
resume only to repeat the same cycle. This went for other a one minute period.

Not sure if this matters but the fans are 3 pins and the board system fans are 4 pin headers.

Also, the fan of the PSU, is also not spinning.

In addition, I checked the back of the mama/board and only the spacers provided
by In Win were installed.

I hope someone can be of helf, as I am a stump two legged computer builder.
0 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Share your knowledge
Back to Hardware Forum
0 total posts (Page 1 of 1)  

Related Discussions

Related Forums