General discussion

  • Creator
    Topic
  • #2091455

    protocol number 0

    Locked

    by dt_howard ·

    When my computer is powering up I receive the following: “The following error occured while loading protocol number 0. Error 254.” I cannot get on my network 100%, zi can use the network printer, but not the other computers.

All Comments

  • Author
    Replies
    • #3878608

      protocol number 0

      by sstalib ·

      In reply to protocol number 0

      Well your trouble ticket does not talk about the O/S which with we are dealing. But looking at the error, my guess is its WinXXX.
      I will also assume you are having two protocols.

      What are the protocols you are using? If you can print, the protocol shared between your printer and your computer is working.

      So, a quick fix would be to remove all other protocols in use, save configuration, restart computer and reinstall the earlier removed protocols.

      Hope this helps.

      Cheers 🙂

    • #3836512

      protocol number 0

      by dt_howard ·

      In reply to protocol number 0

      This question was closed by the author

Viewing 1 reply thread