Question Locked

Qosmio G25 XP pro restart hangs during installation

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Have Toshiba G25. SATA hard drives. Put SATA drivers on floppy. Have Toshiba Floppy drive.
Installation works all the way through until the XP pro needs to restart the computer. The installation hangs up and the computer will NOT restart. Tried all the various settings in the bios for the SATA drives. JBOD, all the raid setting, but no success.
I do not think the XP software has the SP2 on it. ANY help will be appreciated. Thanks in advance

7 replies

by Former member

Hopefully this will cure your start up problem.

Please post back if you have any more problems or questions.

by gboyd

Thank you for your reply. Unfortunately resesting the bios "Load default Settings" did nothing to resolve this problem. I tried it before and during and after trying to load XP pro. No success, it just hangs and now it is starting to turn itself off when I even try to repair or over right on the sector.

by gboyd

I updated the bios (old version 1.30) to the new vesion (1.40) using a floppy disk and the "U" key to boot from the TOSHIBA floppy disk drive. Without this drive I could not have come this far. The second time XP pro asks for drivers during installation the only way to get this done is to buy a USB TOSHIBA floppy disk drive.
I repeated the install and YES this time the computer did restart checking all the links. I am now dealing with XP pro screen and the restart process.

Thanks for your reply and information. The bios upgrade did a great deal.

This has been a tough OS reinstall to say the least.

by Former member

Please post back if you have any more problems or questions.

by gboyd

Again, Thank You. I am now on the WiFi and video drivers installation. I am downloading my virus program and my uninstall program.

I have a few other configurations to preform, but the computer is up and running !!

Best Regards and I hope this thread will help others with this problem.

This discussion is closed to new replies.