quadtel bios upgrade
i search for an update for the quadtel bios 386/sx ver 3.06.01
if any one need help please contact me
nakir2000@yahoo.com
Windows Forum
i search for an update for the quadtel bios 386/sx ver 3.06.01
if any one need help please contact me
nakir2000@yahoo.com
by thechas
Is quadtel the brand of the BIOS, the motherboard, or the system?
What do you expect to achieve with an updated BIOS?
Why do you want / need to keep this antique running?
I even have a hard time finding any detailed information on older Pentium motherboards and systems these days.
You can find fully functional Pentium 233MHz and faster systems for under $20 US.
Many of the firms that recycle computers will not accept anything older than a PIII.
Chas
by nakir2000
Thank you first for your interrest to my question
-Quadtel is the name of the bios wang is the one of the computer.
-wat i expect to achive with an update of bios is supporting high capacite hard drive
-personnaly i dont need to keep it running, but my client who posses a p4 need to keep it running (it's job )
-the price of a pentium 233 mhz in tunisia are higher than 100 dollar
if this bios update is not available replacing it by a standard bios will resolve the problem ?
Excuse me for the bad english
by thechas
Your best option for a BIOS update, is to check directly with Wang.
They are going to be the only source for a 'free' upgrade.
There are 3rd party firms that will write a 'custom' BIOS, but the cost is high.
One such firm, is www.unicore.comExpect to pay around $70 US for a new BIOS file.
Since all you are after is support for large hard drives, I recommend installing a PCI IDE controller card.
Over here, they sell for less than $30.
Not only will you get large hard drive support,you will get ATA 100 or 133 data transfer rates.
I was amazed at the performance increase going from UDMA66 on a motherboard to ATA 100 on a plug-in card.
It was the best $30 I ever spent on a PC upgrade.
Chas
by guruofdos
Use a dynamic overlay software for the new drive. Maxtor and Western Digital both provide overlay software for their drives which get round the bios limitations on older machines. Remember that on a 386, running Windows for Workgroups, the maximum size of a partition on the drive is no more than 2.1Gb so if you are talking tens of gigs of 'large' hard disk, you will have a lot of partitions and associated drive letters! The same applies if you are running DOS. Dos versions lower than 6.00 can only support partitions upto 512Mb!!!
Having used WD's EZDrive and Maxtor's Maxblast on new drives in machines older than 486, I recommend using a newer machine to prepare the drive and then move it to the 386, as a 386sx is too lowly to run the software, which was written using 486 instruction codes and it will just hang on a 386. You will have to use manual BIOS settings for the drive. On a 386, type 47 is normally user defined and maxes out at about 540Mb. Work out the biggest drive the 386can take, then manually set the CHS figures on the new machine to the same settings. Overlay the drive and when you transfer it to the old 386, it SHOULD work!
by guruofdos
Does the Wang have on-board video? If so, the QuadTel rom is for the video, not the pc bios!
Wang Bios chips normally have a Wang label and part number. The Quadtel number you gave matches the ROM on an old Quadtel ISA graphics card I have!
by nakir2000
at the first I would to thank you for interrest to my very old wang
i think i will adopt your solution it's the only possible as i think
This discussion is closed to new replies.
Sort by Trending