Discussion Locked

Questions about Booting Windows

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
First of all let me say...I have searched the questions and can't find the problems I am having. Second of all, I am absolutely new to working on a computer...so here goes.
I bought a bunch of computers from the government. The hard drives were "killed". I am trying to boot in a Windows 95 that I have and am running into the same persistant problems. I will try my best to explain them below.
Ok... the first problem:
I can fdisk and format c:. I have done this. When I get to thepoint where I get to the drive changing to E:, it checks the disk and then gives this message. This is what is on the screen.

Please wait while Setup initializes
Windows Setup requires 7340032 bytes available on your C: drive
E:\>

I have formatted the drives and have tried everything I can think of to get it going. There should be nothing on the drive except what is on the boot diskette, right? SO, I don't understand why it doesn't have enough space!
By the way, here is what I am working with here. I am working with Pentium MMX with 200mhz speed. The hard drives are either 6 or 8 gig. When I did the fdisk, I did the fat 32 because it said I had a drive bigger than the required size. I chose the standard options and partitioned onthe option #1 because it would not let me do anything else.
It recognizes the drives.

Second problem, on another computer, it won't let me fdisk or format. It says these are bad commands, what do I need to do?

I feel so ignorant! I am learning tho...honestly, I have never been on that side of the computer before! I used to just turn a computer on and never think about it!!! Now, that I know I need to do these things, I am learning! Is there anyone out there willing to be a mentor???

11 replies

by beermonster

Hi,
Windows 95 only supports fat32 IF THE MEDIA IS OEM (original equipment manufacturer)! OEM copies of 95 are ones that are given to computer suppliers for delivery along with (or often preinstalled on) a new machine. If you have a copy of 95 that was bought, boxed and off the shelf, direct from a shop then it can't use fat32 - I suspect that this is what is happening here. Try fdisking, but not choosing large drive support (simply say N istead of Y at the prompt). This will create a partition that, once formatted, will be FAT16. The maximum size of a partition in FAT 16 is around 2 megs, so the problem that leaves you is that you are looking at creating around three or four partitions per disk in order to get to use all of the available disk space. If I were you, I would try to get hold of (at least) 98. For the bad commands problem, that error commonly means that dos can't find the file you are trying to use - if fdisk is in a subfolder on the disk, try switching to that folder using the command

cd foldername

you can check if fdisk is in the folder by using the

dir

command - it will list the folders contents. Feel free to reject this post if you need any clarification on what I'm saying (I'll be sent a mail so I'll know you've responded). Good luck.

by opatzg9

Beer Meister nailed it except its a 2 gig limit with windows95 not 2 meg, Also your boot disk to get it going is on drive a: so if you prface the fdisk like so:
A:\FDISK
A:\FORMAT c: /s
that should take care of the file not found or bad command error
If the format c: /s runs and stops with memory errors or not enough resources then just run :
A:\FORMAT c:
followed by :
A:\sys c:
which will move the startup files to the c: drive to make it bootable.
E: is probably whats known as a virtual drive where the files from a: are loaded up to.
the following commands should help you some as well
a: - switches you to the a: drive
c: - switches you to the c: drive etc...
dir - gives you a list of the files in the directory(folder) you are in
dir /s /p - gives you a list of the files in the directory you are in as well as /s-sub directories and /p- page broken(requires key stroke to continue)
cd\ - take you back to the root of the drive
cd.. takes you back 1 directory
cd - changes the directory you are in 1 level deeper to directory DirName
cd\ - takes you back to the root and then in 1 directory in directory DirName.
These should help you find the files when you are looking for them.
The Dir command can be used with a mask as well
* - is any characters
? - is any character
. - seperates a filename from its extension
ie.
dir *.exe - will show all current exe's in the current directory (executable programs)
dir *.com - will show all files which end in .com in the current directory (compiled programs)
dir ?.exe - will only show exe files which have a 1 letter prefix like f.exe.
Well good luck for now, let us know if you need more info.

by thechas

Just ot add to what you have from the other answers.

Your hard drive becomes E: because you are using a W98 startup disk.
With no hard drive present, the W98 startup disk creates a RAM drive, and gives it the first available drive letter.
It then loads the CD-ROM driver, and labels the CD drive as D:
When you FDISK and format without booting, the harddrive becomes E: and above.

If you plan to use W95 on these PCs, you need the correct W95 statup disk for the version of W95 that you have.
There are 4 versions of W95
Original (all W95 upgrades are the original version)
A
B (version 2.0 and 2.1)
C (version 2.5)
Version "C" / 2.5 is the ONLY version of W95 with FAT32 and USB support.

Chas

by Former member

Hi,

As all of the people above said, youd be better off gettinghold of a copy of Windows 98 or 2000. You've probably got Windows 95 A (first edition). I wouldn't recommend using it even if you got it running.

by cglrcng9

Among the reasons they say that is features available, no auto-update info avail. for Win95 anymore (there still is for Win98 as of this writing), and it's like swiss cheese (full of security holes).

Good advice above in all the posts BTW. Good Luck! But take that advice to minimum WIN98SE or 2000.

This discussion is closed to new replies.