Question Locked

RAID 5 On Gigabyte motherboard...!

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Can anyone pls tell me the whole process of configuring RAID5 (Hardware Based) on the Gigabyte MB EX-38-DS4 Motherboard with 3 HDDs 250 G.B. SATA-3.
Do I need to add any RAID Controller Card or without it I can configure RAID 5 on this Board.
Thanks in Advance.

2 replies

by oh smeg

Most Gigabyte M'Board Designations start with the GA prefix and the remaining series start with 7XXXXXXXXXXXRZ or 8XXXXXXXXXXXXRZ.

If the Gigabyte M'Board supports SATA Drives you can use the Built in RAID Controller but you do need to plug the SATA Drives tot he correct Connectors of the M'Board as these are labeled 1 2 3 and so on for each SATA Connector. This is in the Users Manual and you really need to read it up in there.

As for actually configuring the RAID you need to press the [b]F6 Key[/b] and have the RAID Drivers copied to the Root of a Floppy when the first Blue Windows Install Screen appears. At first nothing will appear to happen but you will be prompted to insert a Floppy with the RAID Drivers copied to its Root and then press enter.

As for establishing a RAID 5 As I don't know which model Gigabyte M'Board you have I can not tell you if your M'Board supports RAID 5 Configuration so it is better to look in the Users Manual for these directions. The RAID Driver will also be on the Gigabyte M'Board Disc that came with the M'Board and if you have lost this you'll need to Visit the Gigabyte Web Site to download the newest version available here

http://tinyurl.com/6m2d7w

You can also get a copy of the Users Manual from this place as well.

If you don't have a Floppy Drive and are using Windows XP you can use nLite to make a Slipstreamed Install Disc with the RAID Drivers Included

http://tinyurl.com/e2mo4

Remember to read the Guides Section on the nLite Web Site for directions on using nLite. If you need to install Vista I'm not sure what is involved there and you should look at the Gigabyte Users Manual.

Col

Col

This discussion is closed to new replies.