General discussion

Locked

RAS

By javiertunon ·
I have a w2k adv server running RAS. My data provider (nuvox)installed a pretty cool device that servers as a router/firewall/DHCP
server. When my RAS client log into the network, then can access the Microsoft Mail server and all the internal network devices, but they do not get an IP address assigned and can not go to the internet or send internet mail. I configured the RAS server to use NETBUI and TCP/IP. What have I forgotten? Is this possible?

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

RAS

by erikbutler In reply to RAS

i would diasble the Dhcp on the router and install it on the ad server pc then set up your scopes to include ip address for the RAS portion to assigh when a pc calls in. Also when you have W2K usinfg DHCP it cans push out your WINS and/or DNS entries from your ISP. If the dns entries from your ISP are not being pushed out by DHCP or HArdcoded in then your will never get to the Internet

Collapse -

RAS

by javiertunon In reply to RAS

Disabling the DHCP on the router is not on option. I already thought out that as an option.

Collapse -

RAS

by erikbutler In reply to RAS

i would diasble the Dhcp on the router and install it on the ad server pc then set up your scopes to include ip address for the RAS portion to assigh when a pc calls in. Also when you have W2K usinfg DHCP it cans push out your WINS and/or DNS entries from your ISP. If the dns entries from your ISP are not being pushed out by DHCP or HArdcoded in then your will never get to the Internet

Collapse -

RAS

by javiertunon In reply to RAS

Disabling the DHCP on the router is not on option. I already thought out that as an option.

Collapse -

RAS

by maxwell edison In reply to RAS

I would disable NETBEUI, and use TCP/IP as the ONLY protocol.

Maxwell

Back to Windows Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums