General discussion

Locked

RAS server won't answer

By ajdelo ·
I am running NT 4.0 w/SP6 on my PDC and I have a client running Win98. I have installed an internal modem into my PDC and configured RAS onto it (it is set up correctly as far as I can tell because in Remote Access Admin the port my modem is connected to is "Waiting for call"). I have also configured DUN on the Win98 client to dial in but when it tries to connect, the server never answers (if I plug a phone into the same wall outlet that the server is on, the phone rings when I dial from the client). Am I missing something here?

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

couple things to check.

by craig_vm In reply to RAS server won't answer

After you installed RAS did you reapply the service pack? And check your RAS settings. Make sure "allow incoming only" or "allow incoming and outgoing" is checked. I think by default it is set to allow outgoing only.

Back to IT Employment Forum
1 total post (Page 1 of 1)  

Related Discussions

Related Forums