General discussion

Locked

Reactivate offline Array or down HD

By hdd2002 ·
I have 4 hard drives, 3 are member of Adaptec 131U2 Raid 5 and 1 is the spare.
=================
A while ago, ID1 & ID3 were down, ID2 is OK.
In fact, ID1 motor stopped and NOW it comes back. How do I force the ID1 down status back online? I should reconstruct the Raid from ID1 and ID2.
=======================
By the way, all the command CI/O is gray and I can reconstruct hard drive and reactivate the offline array.
============================
Is there one unversal Raid utility for all the different Raid controller card?
--------------------
Are any more flexible and better Raid card to allow me to force to turn down hard drive to up, force to turn offline array to online manually as I know ID1 is OK physically?

--------------
Thanks

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Reactivate offline Array or down HD

by Net Admin in NC In reply to Reactivate offline Array ...

If it is a Novell server, goto the system console screen and type "scan for new devices" (w/o quotes) and press enter. Then goto the Console Monitor screen and select Storage Devices. Highlight the drive and press enter. Highlight STATUS and press enter. Select activate and press enter.

Collapse -

Reactivate offline Array or down HD

by hdd2002 In reply to Reactivate offline Array ...

Poster rated this answer

Collapse -

Reactivate offline Array or down HD

by hdd2002 In reply to Reactivate offline Array ...

This question was closed by the author

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums