Discussion Locked
0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I had to reinstall WinXP over itself due to loss of Internet access and upon re-entry into Win XP my USB 2.0 HDD was not seen any longer. How might I reactivate the partitions without losing the data? Any ideas? Thanks
3 replies
by thechas
Do you have another PC that you can plug the drive into to verify that the drive is okay?
If the drive is okay, XP just may have missed it when you re-installed.
Try reconnecting the drive to the XP box, and see if XP finds it as a new device.If not, check device manager for problems or conflicts with your hardware.
Also, it may be a "bug" that you need to re-install the XP updates to correct.
If the drive is not okay on another PC, then you need to start looking into data recoverytools.
One site is www.ontrack.com
Another is www.pcwiz.com
Chas
by grolman2001
Poster rated this answer
by grolman2001
Previous answer didn't really help due to drive not seen on another system. The only thing I can figure is that WinXP reinitializes the partitions for who knows what reason, possibly something to do with it being a USB 2.0 HDD. One thing I didn't try to do was have the USB drive disconnected while I reinstalled WinXP and reloaded drivers. Maybe the driver reinitialization somehow hosed the partitions. Once WinXP was up and running again, all it found was a blank HDD according to Disk Administrator. It seems that USB 2.0 HDD's are not handled the same way as internal HDD's but I have not been able to find any info on the internet concerning what actually goes on with the USB 2.0 HDD setup under WinXP. Thanks
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
1 helpful
16 replies
0 helpful
13 replies
0 helpful
3 replies
0 helpful
2 replies
Question
Is WSL still relevant in 2026?
0 helpful
1 reply